info@filamatrix.com

5 Tips for Printing With Nylon Glass Filament Like a Pro

Facebook
Email
Twitter
LinkedIn

Nylon glass filament works well for 3D-printed mechanical parts. Knowing how to print with this fiber pays off well; you’ll have the expertise to print safely, and you’ll know the best cooling methods and which hotbed to use for any prototype. Work like a pro with nylon glass filament by following these five tips for printing.

Set the Right Temperature

Failing to print at the required temperature puts your creations at risk; this goes for the temperature of the nozzle and hotbed. The nozzle should be between 225 and 270 degrees Celsius, while the bed should be between 70 and 90 degrees Celsius.

The temperature range may depend on your 3D printer’s brand. Thoroughly read the product description and user manual to understand the best temperature range for the nozzle and hotbed.

Pay Attention to Print Speed

Printing speed matters when using reinforced filaments like nylon glass. Luckily, controlling the printing speed for prototypes is easy. Still, you need to be mindful when printing for quality instead of quantity.

Stick to 30–60 mm/s for printing speed. Don’t go any higher if the 3D printer is incapable. If you want to practice speed control, stock up on spools to use as testers so you can compare each finished part for quality.

Avoid Using a Cooling Fan

Nylon doesn’t need a cooling fan. It’s best to avoid it entirely, as it can warp. Let the print rest inside an enclosed container so it dries without warping from inconsistent temperatures.

If you don’t have a spare container, place the filament inside your oven, set the temperature below the glass transition temperature, and let it sit for four to six hours so the moisture evaporates.

Use a Glass Bed Surface

If you want to print like a pro while using nylon glass filaments, get a suitable bed surface. Many people struggle to adhere nylon to the build plate. With the right items, you can make it look easy.

Use a glass bed surface so the nylon sticks better; the material adheres well to heated glass. You can even scrape a glue stick across the bed or use painter’s tape for better adhesion.

Buy From a High-Quality Brand

Every brand will tell you they have the best glass nylon filaments, but few are honest sellers with high-quality products. Turn to Filamatrix for more tips on printing nylon glass filaments in a 3D printer. We sell an assortment of high-quality filaments, including the reinforced nylon filament you have been searching high and low for. Explore our site for more products, tips, and tricks on using filaments like a pro!

More to explorer

Models printed on 3D printer

How To 3D Print With TPU Filament

TPU (Thermoplastic Polyurethane) is a flexible filament used for creating rubber-like parts. Knowing how to print TPU correctly can help you achieve